EN 388 and cut protection classes — what do the markings really mean?

Published 02.11.2026 (Updated 02.11.2026)
Cut protection classes and standards in plain language | Total Shop
Cut-resistant gloves · Total Shop

EN 388 and cut protection classes — what the markings really mean

If you've never bought or held a cut-resistant glove, this guide is for you. Let's walk through what the code on the glove's label (for example, "4X12F") really means — without any preconceptions.

Guide C.P.N pisto- ja viiltosuojattu etsintäkäsine, F-luokka
Highest F-class + stab/needle protection — for search work (e.g. Guide CPN)
Kinetixx Hadrian, kovarystyssuojattu taktinen hanska
Hardening protection + grip + cut protection — for official and tactical use
Rostaing Black Tactic, erittäin ohut F-luokan hanska
Incredibly thin — for the best possible dexterity
In a nutshell

The glove label shows the letters A–F. This directly indicates how much force is needed to cut the glove: A is the weakest, F is currently the strongest. When comparing two gloves, look at this letter first.

All cut-resistant gloves are tested to the same European standard, called EN 388 . The standard is essentially a list of tests that measure how well a glove resists abrasion, cuts, tearing, punctures and, if necessary, heat or impact. The result is written on the glove's product label as a short code, for example "4X12F" — next, we'll break it down character by character.

1. The six points of the code — what they mean

The code always has the same order. Some gloves only use some of the items if a feature has not been tested or does not apply to that glove:

  • 1st digit (Rubbing, 0–4): how many times the glove must be rubbed against a rough surface before a hole forms. A higher number is better.
  • 2nd character (Old Cut, 0–5 or "X"): The rotating blade is drawn over the material repeatedly. If you see the letter "X" in this position, it means that the blade itself became dull during the test — not that the glove is weak (more on this in the next section).
  • 3rd character (Tear, 0–4): how much force is needed to tear the material in half.
  • 4th character (Pierce, 0–4): how much force is needed to pierce, for example, a nail or spike.
  • 5th character (New cut, A–F): this is the letter you should trust — A is the weakest, F is currently the strongest.
  • 6th mark (Impact, "P", if tested): only appears on some gloves, usually when there is a separate impact or knuckle protection on the back of the palm.
An example from our own range: The code for the Guide CPN search glove is 4X12F . Let's break it down: abrasion 4, old cut test passed (X), tear 1, puncture 2, new cut test F. Impact protection is not separately marked on this model, so the sixth point is completely missing from the code.

2. Why does item 2 sometimes show an "X" instead of a number?

In the old slit test, a rotating blade cuts through the material over and over again, and the result tells you how many times the blade can rotate before the material is cut through. Think of it as cutting the same knife hundreds of times through the same fabric — eventually the knife itself will dull. This is exactly what happens in this test with modern, truly durable materials: the blade dulls before the material gives way, so the test is no longer measuring the material but rather its own dull knife. When this happens, the lab marks the spot with an "X" instead of giving a misleading number — and moves on to the more precise test in Step 5.

3. New test (letters A–F) — this is worth watching

In the new test, a straight blade is drawn across the material just once , and the force is increased continuously until a 20 mm distance is cut through. Since the blade is not used over and over again, it does not have time to dull — the result is therefore a reliable measure regardless of how durable the material is. The result is converted into letters:

Letter Required power For example, typical usage We have
A at least 2 N Easy handling, no sharp material —
B at least 5 N Light-medium general purpose —
C at least 10 N General outdoor use, e.g. winter patrolling Kinetixx X-Viper
D at least 15 N Medium-duty handling, sharp edges Authorities Gear Black
E at least 22 N Heavy duty, sharp metal edges —
F at least 30 N Most demanding use: knives, glass, prospecting work Rostaing Black Tactic, Guide CPN

The force values ​​are the official minimum figures in the standard. The Application column is our own, common sense illustration — not an official requirement of the standard, but an example to give guidance.

What if the glove shows an old number (e.g. "Level 5")? Many gloves still show the traditional 1-5 rating alongside or instead of the letter — for example, the Guide leather glove says "Level 5" and the Kinetixx Hadrian has an EN388 rating of 5. If both are listed, trust the letter (A-F) — it has been measured using a more accurate method.

4. What if the product label also includes EN 407?

Some tactical gloves, such as the Kinetixx Hadrian, have another marking next to EN 388, EN 407. It is a completely different standard for heat protection — measuring, among other things, how hot a surface the glove can withstand before the wearer feels pain. The Hadrian’s contact heat rating of 4 means that the glove can withstand exceptionally hot surfaces, useful for handling heated weapons, for example. This is an additional feature on top of cut protection, not a replacement for it.

Did you know this?

In certified testing laboratories, the new test blade is moved and its cutting force is increased using precise measuring devices, practically with an accuracy of a fraction of a Newton. It is this accuracy that makes the letter grades (A–F) comparable between different laboratories and manufacturers — the result does not depend on who performs the test or on what machine.

A little history to finish: in the Middle Ages, soldiers and butchers protected their hands with chain mail — armor woven from thousands of small metal rings. The same basic idea still lives on today: some cut-resistant gloves use thin steel wire woven into the fiber. The difference is that instead of the few grams of armor, the current version weighs a few kilograms.

Find the right glove for your needs
Browse the range of cut protection gloves →

Share article